NEW FMT Patriot CNC Router, 5'x10' Table, 10HP HSD Spindle with 10 Station Auto Tool Changer, New with Warranty!
Proposal Details Machine Freedom Machine Tool Patriot machine is an industrial-quality 3-axis 5' x 10' moving gantry CNC router with 7" of Z-axis travel and is capable of maximum rapid feed rates of 1,200 inches per minute. Machine Construction Freedom Machine Tool Patriot machines are constructed of a rigid, fabricated steel base, utilizing heavy gauge steel tube and plate weldment construction throughout. All structural members are stress relieved for maximum stability, and all surfaces that mount precision components are precision ground and/or machined. Spindle Customers may choose from several industrial quality spindle options including wrench style collet spindles and push-button automatic tool change spindles. X-Axis The X-axis is the bridge axis and moves left to right. The heavy duty bridge will span the 60inch dimension. Actual stroke is 61 inches. Maximum feed rate is 800 inches per minute. Bridge rails are 25 mm profiled ways with recirculating ball bearings. The X-axis is driven by a 25mm recirculating ball screw assembly. The ball screw spins and is supported on each end by angular contact bearings. Y-Axis The Y-axis is the gantry axis and moves front to back. The gantry spans the 60 inch left-to-righttable dimension, and travels the 120 inch front-to-back table dimension. The total stroke is 121 inches. Maximumfeed rate is 800 inches per minute. The table rails are 30 mm profiled ways with recirculating ball bearings. The Y-axis is driven by a 40mm recirculating ball screw assembly. The ball screw spins and is supported on each end by angular contact bearings. Z-Axis The Z-axis is ball screw driven and supported by air cylinder counter balances. Model Number Freedom Machine Tool Patriot 5' x 10’ 3-Axis CNC Router, model number F37-5-10-7 (final model # established upon PO) Industrial Controls System Fagor 8037 3-axes CNC Controller fully compatible with CAD/CAM software and featuring a color 7.5′′ LCD monitor, 1 MB base memory, 512 MB compact flash Drive, 3D graphics, TCP / IP Ethernet, USB and serial port connections, and a complete set of Fagor manuals on CD. Controller is driven by Fagor closed-loop brushless AC servo motors and servo amplifiers on all axes. Utilities Power requirements for machine only 220 Volts, 3-Phase, 60 HZ. Amps are determined by final machine configuration. (1-phase option available for purchase) Compressed air requirements 5 CFM at 90 PSI (Static) Note: tool change spindles require a minimum of 95 PSI to ensure proper tool release. Additional air devices will change CFM requirements. Customer is responsible for providing the compressed air. Dust collection Recommend 1,000 CFM at the spindle. Dust collection is not required for all machines. Client may choose to purchase a dust collector and/or piping system as an option. The client is responsible for the installation, hoses and service connections. Vacuum Vacuum is not required for all machines. Client may choose to purchase a vacuum pump as an option. The client is responsible for the installation, hoses and service connections. Set-Up Freedom Machine Tool Patriot machine set-ups are performed at the customer site by Freedom Machine Tool certified technicians. Set-Up & Training Option 1: 1 day machine set-up and 2 days of training at the customer facility, for a total of 3 consecutive days. Set-Up & Training Option 2: 1 day machine set-up and 1 day of training at the customer facility, for a total of 2 consecutive days. Set-Up & Training Option 3: 1/2 day machine set-up and 1/2 day of training at the customer facility, for a total of 1 day. Standard Features Included Machine base ready to accept one of the available 5 foot by 10 foot table options Included 7 Inches Z-axis travel Included The X & Y axes are laser calibrated Included Recirculating ball screw assembly on all axes Included Fagor 8037 3-axis industrial controller with 7.50” LCD color monitor and stand-alone electrical cabinet Included Fagor AC digital drives with closed-loop brushless AC servo motors with absolute encoders on all linear axes Included Dust collection hood with purchase of spindle (Dust collection system not included) Included Dust delivery collection on top of Z-axis accepts a 5 inch dust collection line from client dust collection system Included 4 Ea. centralized grease fitting manifolds mounted on machine to easily lubricate 14 grease locations Included 220 Volts, 3-Phase, 60 HZ, Amps are determined by spindle option selected Included Autodesk Fusion 360 software with ArtCAM (1 year subscription) and 3-axis post processor. (If customer opts to purchase other software, Fusion 360 license and post processor not included.) Included 1 Year limited warranty and basic phone support Included Customer Selected Options 220 Volt, 3 Phase, 60hz power $0 10hp/7.5kw HSD ISO30 24,000 rpm quick change spindle 5′ x 10′ phenolic table machined flat with 3/8′′ steel threaded inserts on 6′′ centers 10hp Becker vacuum pump VTLF 2.250, 174 SCFM, 24′′ Hg, non SK (up to 2,000-2,500 ft. elevation) 208/220/460 volt, 3-ph, 60 Hz. FOB Cuyahoga Falls, OH 44223 Automatic tool height sensor 10-position automatic tool change rack 10 piece tooling package including 10 ea. ISO30 ER32 tool holders with cover-nut, collets, and 3 day on-site machine setup & training. Includes expenses Dust collection delivery system for 5' x 10' models, 2hp canister dust collector included